Ultralow-threshold and lightweight biodegradable porous PLA/MWCNT with segregated conductive networks for high-performance thermal insulation and electromagnetic interference … G Wang, L Wang, LH Mark, V Shaayegan, G Wang, H Li, G Zhao, CB Park ACS applied materials & interfaces 10 (1), 1195-1203, 2018 | 250 | 2018 |
Development of high thermal insulation and compressive strength BPP foams using mold-opening foam injection molding with in-situ fibrillated PTFE fibers J Zhao, Q Zhao, L Wang, C Wang, B Guo, CB Park, G Wang European Polymer Journal 98, 1-10, 2018 | 134 | 2018 |
Use of stereocomplex crystallites for fully-biobased microcellular low-density poly (lactic acid) foams for green packaging L Wang, RE Lee, G Wang, RKM Chu, J Zhao, CB Park Chemical Engineering Journal 327, 1151-1162, 2017 | 119 | 2017 |
Effects of hydrophobic-modified cellulose nanofibers (CNFs) on cell morphology and mechanical properties of high void fraction polypropylene nanocomposite foams L Wang, M Ando, M Kubota, S Ishihara, Y Hikima, M Ohshima, ... Composites Part A: Applied Science and Manufacturing 98, 166-173, 2017 | 106 | 2017 |
Fabrication of high expansion microcellular injection-molded polypropylene foams by adding long-chain branches L Wang, S Ishihara, M Ando, A Minato, Y Hikima, M Ohshima Industrial & Engineering Chemistry Research 55 (46), 11970-11982, 2016 | 82 | 2016 |
Unprecedented development of ultrahigh expansion injection-molded polypropylene foams by introducing hydrophobic-modified cellulose nanofibers L Wang, S Ishihara, Y Hikima, M Ohshima, T Sekiguchi, A Sato, H Yano ACS Applied Materials & Interfaces 9 (11), 9250-9254, 2017 | 78 | 2017 |
Fabrication of lightweight microcellular foams in injection-molded polypropylene using the synergy of long-chain branches and crystal nucleating agents L Wang, Y Hikima, S Ishihara, M Ohshima Polymer 128, 119-127, 2017 | 74 | 2017 |
Effect of surface modification on the dispersion, rheological behavior, crystallization kinetics, and foaming ability of polypropylene/cellulose nanofiber nanocomposites L Wang, K Okada, M Sodenaga, Y Hikima, M Ohshima, T Sekiguchi, ... Composites Science and Technology 168, 412-419, 2018 | 69 | 2018 |
Introduction of stereocomplex crystallites of PLA for the solid and microcellular poly (lactide)/poly (butylene adipate-co-terephthalate) blends X Shi, J Qin, L Wang, L Ren, F Rong, D Li, R Wang, G Zhang RSC advances 8 (22), 11850-11861, 2018 | 58 | 2018 |
Effect of cellulose nanofiber (CNF) surface treatment on cellular structures and mechanical properties of polypropylene/CNF nanocomposite foams via core-back foam injection molding L Wang, K Okada, Y Hikima, M Ohshima, T Sekiguchi, H Yano Polymers 11 (2), 249, 2019 | 55 | 2019 |
Cellulose nanofiber reinforced poly (lactic acid) with enhanced rheology, crystallization and foaming ability Q Ren, M Wu, L Wang, W Zheng, Y Hikima, T Semba, M Ohshima Carbohydrate Polymers 286, 119320, 2022 | 51 | 2022 |
Cylindritic structures of high-density polyethylene molded by multi-melt multi-injection molding K Zhang, Z Liu, B Yang, W Yang, Y Lu, L Wang, N Sun, M Yang Polymer 52 (17), 3871-3878, 2011 | 51 | 2011 |
A new microcellular foam injection‐molding technology using non‐supercritical fluid physical blowing agents A Yusa, S Yamamoto, H Goto, H Uezono, F Asaoka, L Wang, M Ando, ... Polymer Engineering & Science 57 (1), 105-113, 2017 | 42 | 2017 |
Development of a simplified foam injection molding technique and its application to the production of high void fraction polypropylene foams L Wang, Y Hikima, M Ohshima, A Yusa, S Yamamoto, H Goto Industrial & Engineering Chemistry Research 56 (46), 13734-13742, 2017 | 34 | 2017 |
Evolution of cellular morphologies and crystalline structures in high-expansion isotactic polypropylene/cellulose nanofiber nanocomposite foams L Wang, Y Hikima, M Ohshima, T Sekiguchi, H Yano RSC advances 8 (28), 15405-15416, 2018 | 33 | 2018 |
Large scale formation of various highly oriented structures in polyethylene/polycarbonate microfibril blends subjected to secondary melt flow XC Xia, W Yang, QP Zhang, L Wang, S He, MB Yang Polymer 55 (24), 6399-6408, 2014 | 31 | 2014 |
Morphology and mechanical property of high-density polyethylene parts prepared by gas-assisted injection molding L Wang, B Yang, W Yang, N Sun, B Yin, JM Feng, MB Yang Colloid and Polymer Science 289, 1661-1671, 2011 | 29 | 2011 |
Multifunctional polyether block amides/carbon nanostructures piezoresistive foams with largely linear range, enhanced and humidity-regulated microwave shielding X Li, S Li, M Wu, Z Weng, Q Ren, P Xiao, L Wang, W Zheng Chemical Engineering Journal 455, 140860, 2023 | 26 | 2023 |
Crystallization behavior and molecular orientation of high density polyethylene parts prepared by gas‐assisted injection molding N Sun, B Yang, L Wang, JM Feng, B Yin, K Zhang, MB Yang Polymer international 61 (4), 622-630, 2012 | 25 | 2012 |
Fabrication of super-hydrophilic and highly open-porous poly (lactic acid) scaffolds using supercritical carbon dioxide foaming Q Ren, X Zhu, W Li, M Wu, S Cui, Y Ling, X Ma, G Wang, L Wang, ... International journal of biological macromolecules 205, 740-748, 2022 | 24 | 2022 |